Sold by the CONTINUOUSYARD / You can order as many yards as you need!Fender Flare Trim is an ozone resistant EPDM Rubber that mounts between the flare and the body.3M automotive grade tape creates a solid bond between both surfaces.Tape: BT – 3M High Strength Tape SystemThe ultimate bond between therubber and substrate. Creates amoisture barrier and air tightseal between rubberandsubstrate. Highest peel andshear resistance, can be usedunder high loads of stress andforce.Has low initial tack foreasy re-positioning duringinstallation and requires 72 hours of cure time for fullbond strength. Good heat performance -20F to +158. Recommended temperature range forgeneral applications:-20F. through +150F, Sponge Rubber (EPDM)Application:For optimum performance -25% – 50% maximum compressionrecommended.Resistance Ratings: Excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set.Flammability and CodeCompliance:FMVSS 302,UL 50CLEANING AND APPLICATION INSTRUCTIONSRegardless of bonding surface, it must be clean and free of surfacecontaminant such as oil, grease, mold release and dirt.Most bonding failures are due to improperly cleaned surfaces.Prior to applying any adhesive, Clean surface with 50/50 denaturedalcohol and water solution.